How to Use KYDZ Key Programmer

Support: KYDZ hand-held auto key programmer user manual

Power on and off
1.Power on: press the battery button in 3 to 5 seconds, entering the Android screen, then click the “agree”.
2.Power off: press the battery button in 2 to 3 seconds, appearing the word “power off”, then click the  “power off”.

Instruction:
1.Remote making

Please check if the battery of the RKE remote key can work before making, then clicking the “remote make”—–choose the area—-choose the type of car—-enter the screen of remote make—-put the RKE remote key into the Key slot—-appear the word “connect the remote key”—-click generate—remote making—–read successful—-confirm.

2.Detecting frequency

(1)detecting frequency: click “frequency”—–put the remote key near this machine—-press the button of the remote key—-appearing relative information of the key.
(2)Detecting infrared:click “frequency”—–put the remote key near this machine—-press the button of the remote key—-appearing information.

3.NXP renew

Click “NXP renew”—-choose the area—-choose the type of the car—–enter the screen and connect the circuit—–use the PS2 wire to connect the port of the PS2——–click “refresh/update”——-reading the chip——read successful—-click “confirm”

4.Chip identity

(1)Click “chip identity”—–put the chip into the Key slot—-click chip identity—–recognizing—-finished—-showing the information of chip—click “chip edit”
(2)Click “chip identity”—–out the chip into the key slot——click “EEPROM”—-click “read the data of EEPROM”

5.Copy:(still research and develop).

6.Special function:(still research and develop).

7.Smart card
Please check if the battery of the RKE remote key can work before making, then clicking the “remote make”—–choose the area—-choose the type of car—-enter the screen of remote make—read PKE remote key—adjust it untill it display the “ PKE remote key”—-click “generate”–confirm

8.Making Chip
(1)Car model:put the chip into the key slot—-click “make chip”—-car model—-choose the area—-choose the type of the car—-click “Importing files”—comfirm—-back to the last interface—click “generate”–confirm
(2)Image generator：put the chip into the key slot—-click “ make chip”—click “image generator”—choose G producing as your need
(3)Unlock: put the chip into the key slot—–click “make chip”—–click “unlock”—-choose the area—-the the type of the car— detecting the battery—detecting the data of the factory—-reset the chip.

9.Setting
(1)WIFI setting: click “setting”—click “wifi setting”—-choose the internet——connect
(2)display setting:click “setting”—click “display setting”—-adjust the light of the screen as you want
(3) volume setting:click “setting”—click “volume setting”—-adjust the volume of the screen as you want
(4)language setting:click “setting”—English/chinese
(5)PC mode:connect to the computer
(6)About: showing the version of KYDZ programmer