Autel G-Box 2: 8x Faster Calculation with DAS3 CAN EIS/EZS in AKL

Instruction:

What is Autel G-Box2?
Designed for use in Mercedes-Benz vehicles with DAS3 CAN EIS / EZS in AKL. More functions for rading ECU data. Faster calculation in case of total loss of keys.
8x faster in the calculation for models W172, W204 and W207
4x faster in the calculation for models W209, W211, etc …

G-box 2 is better than G-box?

The Autel G-BOX2 is an adapter compatible with Autel’s IM508 (with Purchase of XP400 programmer) and IM608 Key Programming tablets used to aide in the programming keys for Mercedes DAS3 CAN EIS/EXS in an ALL Keys Lost situation. The G-Box2 also supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles.  Bench Method is also supported. All Keys Lost password calculations are 4x to 8x faster. Moreover, the number of insertions and removals of W216 and W164 EISs after the year 2009 is reduced to zero, greatly simplifying the operation steps. It can be used in Boot Mode or Bench Method. G-BOX2 needs to be used with the Autel IM508 or IM608 for reliable performance.

1. Mercedes DAS3 add keys and all keys lost on bench. (both)
2. Mercedes DAS3 all keys lost on vehicle. (both)
3. Read engine control module password by boot. (both)
4. Read Bosch ME/MED/MEVD/EDC 17 Engine control module password on the bench. (G-BOX2 only)

Vehicle coverage:
Mercedes all keys lost – faster password calculation
 -8x times faster password calculation for EIS W172, W204, W207
-4x times faster password calculation for EIS W209, W211, etc.

Mercedes all keys lost – no more repeated insertions and removables of ir simulator
 W164/-208, W251/-2008, W164/2009-, W169, W251/2009, W216, W221 (partial), W202 (K)/ W208 (K)/ W210 (K), W203 (K)/ W463 (K)

Mercedes all keys lost – can be programmed on the vehicle without removing the EIS
 Except for EIS W164/-2008, W251/-2008, W221, W202 (K)/ W208(K)/ W210 (K), and W203 (K)/ W463 (K), all other eis can be programmed on the vehicle directly

Mercedes all keys lost, BMW DME/DDE ISN reading and writing in boot mode
 23 categories of Bosch engine, including MEVD/EDC17
6 categories of Siemens/Continental engine, including MSD/MSV engine

Direct programming in the car without having to take out the EZS to work on the bench, for all EIS models, except:

  • W164 -2008
  • W251 – 2008
  • W221
  • W202 (K)
  • W208 (K)
  • W210 (K)
  • W203 (K)
  • W463 (K)

BMW

  • Rading the isn code of the ECU / DME / DDE in boot mode
  • 23 ECU Bosch models including MEVD / EDC17
  • EDC17C06
  • DC17C41
  • EDC17C50
  • EDC17C56
  • EDC17CP02
  • EDC17CP09
  • EDC17CP45
  • EDC17CP49
  • MED17.2
  • MEV17.2
  • MEV17.2.2
  • MEVD17.2
  • MEVD17.2.2
  • MEVD17.2.4
  • MEVD17.2.5
  • MEVD17.2.6
  • MEVD17.2.7
  • MEVD17.2.8
  • MEVD17.2.9
  • MEVD17.2.G
  • MEVD17.2.H
  • MEVD17.2.P
  • MEVD17.2.S

6 ECU Siemens Models, including MSD / MSV motors

  • MSD80
  • MSD81
  • MSD85
  • MSD87
  • MSV80
  • MSV90

Conclusion:
Less Time, More Secure!

  • Supports fast mode on vehicle and bench when all keys of Mercedes-Benz vehicles using the DAS3 EIS/EZS are lost.
  • Reads and writes Bosch engine ECU on F chassis of BMW and MQB of Volkswagen.

Tags: